instant request

vertrieb [at] gwp [dot] eu

cropped-cropped-gwp-logo.png
Automotive
cable sheath
aviation
board CT scan 4 µm
Medical Technology
Velcro CT
plastics plastics laboratory Germany
solar power station
a lot of medical pills for colds and viruses
GWP Battery Laboratory Battery Testing
Unibody Car Chassis Frame Isolated
Tensile Testing Material Testing Automotive
metallography laboratory beautiful structure
battery laboratory
rem-fracture-surface-copper-hydrogen-disease_
component-separated examination of aluminum engines GWP laboratory
Rolls of galvanized steel sheet inside the factory or warehouse
Computed Tomography Laboratory Foam Structure Analysis
burning speed-FMVSS302
metallography-deep-etched-AlSi SEM image
rem uptake of calcium agglomerate
surface inspections

laboratory services

In our materials laboratories at several locations in Germany, we offer you the necessary laboratory services in the areas of material testing, environmental simulation and material analysis. The metal and plastics processing industry uses our materials laboratories to generate reliable material and component data and thus ensure their product quality.

 

asbestos analysis REM image of asbestos fibers
Analysis of elements in the trace range trace analysis periodic table
Analysis of hydrogen, oxygen and nitrogen in metals Analysis of elements in the trace range
Analysis of carbon and sulfur in steel Analysis of elements in the trace range C and S
Spark spectral analysis of copper materials and copper alloys copper analysis
Spark spectral analysis of aluminum and aluminum alloys aluminum analysis
Spark spectral analysis of high-alloy stainless steels steel analysis
Spark spectral analysis of low-alloy and unalloyed steels steel analysis
Weathering Testing Plastics
outdoor weathering
colorimetry
tensile shear test on adhesives
roller peel test
X-ray residual stress measurement residual stress measurement_Xstress
particle assessment particle scanning electron micrograph
Stone chip test Stone chip test plate with granulate
writing inclination
writing stability writing stability-pv3974-test
abrasion test abrasion resistance crockmeter
Roughness measurement 3D surface measurement roughness profile
hot scratch test
fingernail test fingernail test-bmw-gs-97034-2
pencil hardness test pencil hardness test implementation
Target-actual comparisons using computer tomography 2D X-ray inspection-YXLON-Al-Housing-2D
DIN EN 60068-2-78
DIN EN 60068-2-30
DIN EN 60068-2-14
DIN EN 60068-2-2 Dry heat
DIN EN 60068-2-1
fire behavior according to ISO 75200
fire behavior according to FMVSS 302
Heat release rate (MARHE)
fire protection test glow wire
Oxygen Index (LOI) ISO 4589-2
SES N 3243 Coating quality of plastic parts
Honda 7710Z painted foiled and coated components in vehicle interior
Mercedes Benz DBL 7384 Coatings of plastic parts in vehicle interiors
Daimler DBL 5404 Delivery specification for parts made of thermoplastics
TL 52711 Component requirements for underbody applications in sandwich construction
TL 52452 Material requirements a of injection-molded parts in vehicle interiors made of polypropylene
TL 52388 Polypropylene for vehicle interiors
TL 52231 Material requirements for injection-molded parts in vehicle interiors
TL 527 Material requirements for finished parts made of ABS graft polymer
TL 226 Testing of paintwork on vehicle interior materials
TL 211 Coating of plastic exterior components
Surveying with Photogrammetry Photogrammetry_3D view
Determination of the coefficient of linear expansion using photogrammetry photogrammetry equipment
Deformation analysis using photogrammetry Photogrammetry_3D view
Charpy impact test (DIN EN ISO 179)
Rockwell hardness test according to DIN EN ISO 6508-1
Brinell hardness test according to DIN EN ISO 6506-1 Hardness Brinell Impression Hardness Test Brinell
Vickers hardness test according to DIN EN ISO 6507-1 Vickers indentation hardness test
sintering and microhardness according to DIN EN ISO 4498
Hardness progression across components – Vickers hardness test in all load levels at GWP
decarburization depth according to DIN EN ISO 3887:2018-05 (microhardness test)
Nitriding hardness depth Nht according to DIN 50190-3 Nitriding hardness test Nitriding hardness depth Nht according to DIN 50190-3:1979-03
Hardness mapping: 2D hardness curve for precise material analyses hardness mapping weld Vickers
Brinell hardness test according to DIN EN ISO 6506-1:2015-02 Hardness Brinell Impression Hardness Test Brinell
image analysis Microscopy Pore Analysis Metallography
Macroscopic examinations corrosion-weld-gas-lance
Light microscopy of unetched sections non-metallic inclusions
Light microscopy of etched sections microstructure assessment_austenitic_microstructure
Transmitted light microscopy of thin sections at the GWP Microscopy Microtome section Ultrasonic weld
scanning electron microscopic investigations Scanning electron microscopy analyzed fracture surface fatigue fracture
general light microscopic examinations Macroscopy Macrosection Weld seam etched Metallography
impact test according to DIN EN ISO 148-1 impact bending test impact pendulum IMPACT 450
Phase analysis using X-ray diffraction (XRD) on electrodes
Element distribution images in SEM+EDX of electrode materials element distribution image EDX REM
Chemical analysis of electrolyte and electrodes
Blowhole and pore analysis of castings using computer tomography void and pore analysis with computer tomography
Computed tomography | Determination of the geometry of internal structures Computed Tomography Geometry Determination of Internal Structures
Wall thickness analysis using CT and X-ray 2D X-ray inspection-YXLON-Al-Housing-2D
Evaluation of salt core residues using CT
cross-cut test
scratch test | scratch resistance
abrasion test – micro-scratch resistance
Abrasion resistance – abrasion test
Roughness measurement
Determination of the dendrite arm spacing (DAS) Determine dendrite arm spacing
evaluation of non-metallic inclusions non-metallic inclusions
Assessment of Graphite Formation in Cast Iron graphite formation cast iron
Determination of layer thickness according to DIN EN ISO 1463 and DIN EN ISO 2808 layer thickness determination
Grain size determination according to ASTM E 112 and DIN EN ISO 643 Grain size determination according to ASTM
Microstructure assessment of nickel materials and superalloys Microstructure Assessment_Nickel_IN718
Microstructure Assessment of Copper Materials microstructure assessment_copper_screw_rolled
Investigation of white etching areas in rolling bearings structural assessment_roller bearings
Microstructure Assessment of Titanium Materials Investigation of heat treatment of titanium
microstructure assessment of aluminum microstructure assessment_aluminium-silicon-AlSi12
microstructure assessment of cast iron cast iron_extract_from_DIN_EN
Microstructure Assessment of Austenitic Steels microstructure assessment_austenitic_microstructure
Microstructure assessment of unalloyed and low-alloyed steels Metallography_Steel_Structure_Ferrite_Pearlite
development of energetic materials
Short-term dynamic experiments
Energetic Materials: Monitoring of Field Parts
Qualification of energetic materials
security systems
damage caused by plastic aging fracture plastic REM image
anion chromatography Anion Chromatography IC Ion Analysis Diagram
Determination of the aging of lubricants Determination of the aging of lubricants
Media resistance according to DIN EN ISO 2810 Media resistance according to DIN EN ISO 2810
fire test according to UL 94 fire test according to UL 94
Tensile test on separator films ISO 527-3
Tensile test battery foil DIN 50154 / ASTM E345
Checking the electrode structure and contact in the microsection
Chemical analysis of electrolyte and electrodes
thermal desorption analysis VDA 278
total carbon emissions VDA 277
Determination of formaldehyde emission AA-0061
formaldehyde release VDA 275
odor test VDA 270 2018-01
Airbag acoustic test: according to AK-ZV 01:2001-10
Airbag dust analysis: dust fractionation with Andersen impactor
Airbag gas analysis AK-ZV01 or SAE J1794
Fatigue tests
Dynamic stress tests
shock tests
vibration tests
SAND2017-6925
GB 38031 – China
UN 38.3 Transport Test
ECE R136
ECE R100
fire tests of complete electric vehicle systems
thermal stability tests
penetrant test with nails
performance tests at different temperatures
internal resistance measurements
short-circuit and overload tests
cycle tests on batteries
particle analysis ParticleCheck-Element Distribution Overview_REM-EDX_Particles
Technical Cleanliness VDA 19 Technical Cleanliness Filter Particle Analysis
Airbag dust analysis AK-ZV 01; SAE J1794
ASTM E 415 Sparks – Spectral analysis of low and unalloyed steels ASTM E 415 2017: Spark Spectral Analysis Spectral Analysis Determining Steel Grades
Spark spectral analysis of cast steel
Thermogravimetric Analysis
Differential thermal analysis (DTA)
XRF analysis of chips and particles
Determination of the melting temperature with DSC
Determination of the enthalpy of fusion
Determination of the reaction temperature and the reaction enthalpy
Determination of the Bake-Hardening Index according to DIN EN 10325 Bake-Hardening-Index Measurement Laboratory
Tensile test with r- and n-value determination according to ISO 10275 zugpruefung_rn_02
Tensile test on elastomers according to ASTM D412 / ISO 37 tensile test elastomer diagram
Shore hardness test
hardness curve measurements
2D X-ray inspection: defect analysis
2D X-ray inspection: defect analysis
3D X-ray inspection: Determination of volume, porosity, foam structures
DIN EN ISO 1183-1 Density determination of non-foamed plastics
sampling of large components
General sampling
Round tensile specimen production according to DIN 50125
flat tensile specimen production Workshop-Apparatebau_Vorrichtung-fuer-Flachzugproben
DIN EN ISO 11640 Leather – Colour fastness tests – Determination of rub fastness of dyes
DIN EN ISO 1183-1 Density determination of non-foamed plastics
DIN 34804:2020-03 Mechanical fasteners – Degrees of change of black surface coating systems
DIN 4102-1 Fire behavior of building materials and components
DIN 50018: 2013-05 Testing in condensate alternating climate with sulphur dioxide-containing atmosphere
DIN 50958:2012-12 Galvanic coatings – Modified Corrodkote corrosion test
DIN 51045-A Determination of thermal length change of solid bodies
DIN 53236:2018-02 Colorants – Measurement and evaluation conditions for determining color differences
DIN 53435 :2018-09 Bending test and impact test on Dynstat test specimens made of plastic DIN 53435 2018-09 Bending test and impact test on Dynstat test specimens made of plastic
DIN 53504:2017-03 Testing of rubber and elastomers
DIN 75201: 2011-11 Determination of the fogging behaviour of materials used in motor vehicle interiors
DIN EN 10164:2018-12 Steel products with improved deformation properties perpendicular to the product surface
Tensile test on metals according to DIN EN 10002-1 tensile testing of metals
Plastics: Determination of tensile properties according to DIN EN ISO 527 tensile test-plastic-torn-clamped
airbag dust analysis airbag laboratory dust analysis_Andersen impactor_loaded impact plates
Airbag Performance of Fuels Airbaglabor-Performance-Fuel-DAB-Gas
airbag gas analysis Airbag_R_I_Flow_Schemes_Emissions_Measuring_Section
Airbag Performance of Fuels Airbaglabor-Performance-Fuel-DAB-Gas
Material engineering investigations on airbag igniters airbag laboratory igniter with housing and short-circuit flag
Non-destructive testing of airbag modules Airbaglabor-ZfP-Airbagmodule_2D-X-ray
Characterization of airbag fabric Airbaglabor-Airbaggewebe_Luftsack-aus-Polyamid
Physical Characterization of Pyrotechnic Propellants Airbag laboratory propellant_propellant
Environmental simulation of airbag fuels airbag laboratory environmental simulation_climate test
Case hardening depth CHD according to DIN EN ISO 2639
Round tensile specimen production according to DIN 50125 round pull test
Tensile test on metals according to DIN EN 10002-1 tensile testing of metals
environmental simulation of airbag modules airbag laboratory environmental simulation_climate test
DIN 50125:2022-08 Testing of metallic materials – Tensile test specimens material testing tensile test
Airbag materialography on gas generators and igniters Airbag laboratory materialography_section gas generator

GWP Newsletter

GWP Magazine

Society for Materials Testing mbH
Ensure quality | Support development | Analyze damage | Pass on knowledge

GWP Society for Materials Testing mbH
Georg Wimmer ring 25
D-85604 Zorneding/Munich

Tel. +49 8106 994110
Fax + 49 8106 994111
www.gwp.eu

Munich Commercial Register
HRB 53245
VAT ID No. 131 179 893

Managing Director:
Alexander Mayer
Dr. Stefan Loibl
Simon Löhe

Certania logo